Key As Send; Phone Lock - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
2. Enter the current password in the Current PWD field.
3. Enter the new password in the Ne w PWD field.
4. Re-enter the new password in the Confirm PWD field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Se curity->Password.
You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Me nu->Features->Key as send.
2. Press
or select Dis abled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path F e atures->General
Inf ormation.
You can lock your phone temporarily when you are not using it. This feature helps to
protect your phone from unauthorized use.
Phone lock consists of the following:
Me nu Key:
F unction Keys:
26
or , or the Switch soft key to select # or * from the Ke y as send field,
The Me nu soft key is locked. You cannot access the menu of the
phone until unlocked.
The function keys are locked. You cannot use the MESSAGE,