Dial-Now; To Edit A Replace Rule Via Web User Interface; To Delete One Or More Replace Rules Via Web User Interface - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
4. Enter the desired line ID in the A ccount field or leave it blank.
5. Click A dd to add the replace rule.
When you enter the number "1" using the keypad and then press the Se nd soft key,
the phone will dial out "1234" instead.
Not e
The valid values of Account field can be one or more digits among 1-3. Each digit must
be separated by a comma. For example, when you enter the value "1, 2" in the Ac count
field, this replace rule will apply to account1 and account2.
If you leave the Acco unt field blank or enter 0, the replace rule will apply to all accounts.
To e dit a replace rule via web user interface:
1. Click on Se t tings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the check box.
3. Edit the values in the P refix and Re place fields.
4. Enter the desired line ID in the A ccount field or leave it blank.
5. Click Edit to accept the change.

To delete one or more replace rules via web user interface:

1. Click on Se t tings->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the check box(es).
3. Click De l to delete the replace rule(s).
Not e
Replace rule is configurable via web user interface only.
You can configure one or more dial-now rules (up to 100) on your phone. When the
64