Ring Tones; To Adjust The Volume When The Phone Is During A Call; To S Elect A Ring Tone For The Account Via Phone User Interface - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone

To adjust the volume when the phone is during a call:

1. Press
(handset, speakerphone or headset).
Ring tones are used to indicate incoming calls. You can select different ring tones to
distinguish different accounts registered on your phone, or to distinguish your phone
from your neighbor's.
To s elect a ring tone for the phone via phone user interface :
1. Press Me nu->Settings->Basic Settings->Sound->Ring Tones->Common.
2. Press
3. Press the Save soft key to accept the change or the Back soft key to cancel.
A ring tone for the phone is configurable via web user interface at the path
Se ttings->Preference->Ring Type.

To s elect a ring tone for the account via phone user interface:

1. Press Me nu->Settings->Basic Settings->Sound->Ring Tones.
2. Press
3. Press
30
to adjust the volume of currently engaged audio device
or to select the desired ring tone.
or to select the desired account and then press the Enter soft key.
or to select the desired ring tone.