Headset Use; Headset Mode Activation/Deactivation; Headset Prior - Yealink T48G-SKYPE FOR BUSINESS EDITION User Manual

Headset Use

If you want to use a wired headset, physically connect your headset to the phone and activate
the headset mode for use. For more information on physically connecting a headset, refer to
Phone Installation
If you want to use a wireless headset, insert the Bluetooth
back of the phone. For more information on using a Bluetooth headset, refer to
89
.
provides an introduction to wired headset use.
This section
Note
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth headset can
be used.

Headset Mode Activation/Deactivation

To activate the headset mode:
Press
1.
The HEADSET key LED illuminates solid green when the headset mode is activated. When
you tap
For more information on using the headset to answer a call, refer to
page 115.
With the handset on-hook, enter the desired number and tap
place a call using the headset automatically. For more information on using the headset to
place a call, refer to
To deactivate the headset mode:
Press
1.
The HEADSET key LED goes out when the headset mode is deactivated.

Headset Prior

You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
Click on Features->General Information.
1.
on page 14.
on the phone.
to answer an incoming call, the call is connected to your headset automatically.
Placing Calls on page 112.
again on the phone.
Customizing Your Phone
USB dongle into the USB port on the
Bluetooth
Answering Calls
, the phone will then
on page
on
87