Music On Hold - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
The multicast RTP session is established again.
4. To end the multicast RTP session, press the EndCall soft key.
Not e
Multicast RTP is one way only from the sen der to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.
To s end RTP stream via a paging key list when the receiver's phone is idle:
1. Press the paging list key when the phone is idle.
2. Press
3. Press
4. To place the current multicast RTP session on hold, press the Hold soft key.
The sender's phone places the multicast RTP session on hold and receiver's phone
releases the session.
5. To resume the held multicast RTP session, press the Re s ume soft key.
The multicast RTP session is established again.
6. To end the multicast RTP session, press the EndCall soft key.
Music on hold (MoH) is the business practice of playing recorded music to fill the silence
that would be heard by the party placed on hold. To use this feature, you should specify
a SIP URI pointing to a Music on Hold Server account. When a call is placed on hold, the
phone will send a SIP INVITE message to the Music on Hold Server account. The Music
on Hold Server account automatically answers the SIP INVITE messages and
immediately plays audio from some source located anywhere (LAN, Internet) to the
held party. Contact your system administrator for the SIP URI.
To configure music on hold server via web user interface:
1. Click on A ccount->Advanced.
2. Select the desired account from the pull-down list of A ccount.
120
or to select the desired group.
or the Paging soft key to send RTP .