Auto Redial; To Configure Auto Redial Via Phone User Interface; To Use Auto Redial - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
You can enable auto redial to automatically redial a phone number when the called
party is busy. You can also configure the number of auto redial attempts and the time to
wait between redial attempts.

To configure auto redial via phone user interface:

1. Press Me nu->Features->Auto Redial.
2. Press
field.
3. Enter the desired time (in seconds) in the Re dial Interval field.
The default time interval is 10 seconds.
4. Enter the desired number of redial attempts in the Re dial Times field.
The default times are 10.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path F e atures->General
Inf ormation.

To use auto redial:

When the called party is busy, the LCD screen prompts the following:
1. Press the O K soft key to activate auto redial. The following prompt will appear on
the LCD screen of the phone:
78
or , or the Switch soft key to select Enabled from the A uto Redial