To Configure The Call Forward Mode Via Web User Interface; To Enable Call Forward In Phone Mode - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
P hone (default): Call forward is effective for the phone system.

Custom: Call forward can be configured for each or all accounts.


To configure the call forward mode via web user interface:

1. Click on F e atures->Forward & DND.
2. In the F orward block, mark the desired radio box in the Mode field.
3. Click Conf irm to accept the change.
Not e
Call forward mode is configurable via web user interface only.
To e nable call forward in phone mode:
1. Press Me nu->Features->Call Forward.
2. Press
soft key.
3. Depending on your selection:
a) If you select A lways Forward:
1) Press
F orward field.
2) Enter the destination number you want to forward all incoming calls to in
86
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select Enabled from the Always