To Configure The Forward Authorized Numbers Via Web User Interface - Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
4) (Optional.) Enter the no answer forward on code or off code respectively
in the O n Code or O f f Code field.
You can also enable no answer forward for all accounts. After no answer
forward was enabled for a specific account, do the following:
1) Press
2) Press the A ll Lines soft key.
The LCD screen prompts "Copy to all lines?".
3) Press the O K soft key to accept the change or the Cancel soft key to
cancel.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
If you activate call forward for the default account, the associated line icon will change
to , and the
If you activate call forward for the non-default account, only the associated line icon will
change to .
Call forward is configurable via web user interface at the path F e atures->Forward &
DND .
Not e
You can also enter the SIP URI or IP address in the Fo rward to field. For more information
on using the SIP URI or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call
forward on code or off code may be different between servers. For more information,
contact your system administrator.

To configure the forward authorized numbers via web user interface:

1. Click on F e atures->Forward & DND.
2. Select Enabled from the pull-down list of F orward Emergency.
3. Enter the numbers in the F orward A uthorized Numbers field.
90
or to highlight the No A nswer Forward field.
icon will appear on the status bar.
Placing Calls on page 72.