Handset/Headset/Speakerphone Mode - Yealink SIP-T2 Series Administrator's Manual

To configure ringer device for headset via web user interface:
Click on Features->Audio.
1.
Select the desired value from the pull-down list of Ringer Device for Headset.
2.
Click Confirm to accept the change.
3.

Handset/Headset/Speakerphone Mode

Yealink IP phones support three ways to place/answer a call: using the handset, using the
headset or using the speakerphone. You can disable the infrequently used audio device as
required.
Procedure
Handset/headset/speakerphone mode can be configured using the configuration file.
Central
Provisioning
(Configuration File)
Details of the Configuration Parameters:
features.speaker_mode.enable
<y0000000000xx>.cfg
Parameters
Configuring Audio Features
Configure the speaker mode.
Parameter:
features.speaker_mode.enable
Configure the handset mode.
Parameter:
features.handset_mode.enable
Configure the headset mode.
Parameter:
features.headset_mode.enable
Permitted Values
0 or 1
Default
1
737