Live Dialpad; Hotline - Yealink SIP-T40P User Manual

You can enable live dialpad feature on the SIP-T40P IP phone, which enables the IP
phone to automatically dial out a phone number without pressing the send key. You can
also configure a delay, and then the phone will dial out the phone number
automatically after the designated period of time.
To e nable live dialpad via web user interface:
1. Click on Se t tings->Preference.
2. Select Enabled from the pull-down list of L ive Dialpad.
3. Enter the desired delay time in the Int er Digit Time(1~14s) field.
The default delay time is 4 seconds.
4. Click Conf irm to accept the change.
Not e
Live dialpad is configurable via web user interface only.
You can dial a hotline number immediately upon lifting the handset, pressing the
Speakerphone key or the line key. You can also configure a delay, and then the phone
will dial out the hotline number automatically after the designated period of time.
To configure the hot line number via phone user interface:
1. Press Me nu->Features->Hot Line.
Customizing Your Phone
69