To Delete A Paging Group Via Phone User Interface - Yealink SIP-T40P User Manual

5. Enter the group name in the L abel field.
6. Press the Save soft key to accept the change.
7. Repeat the steps 2-6, you can add more paging groups.
Paging list is configurable via web user interface at the path: Directory->Multicast IP.

To delete a paging group via phone user interface:

1. Press the paging list key when the phone is idle.
2. Press or to select a desired group.
3. Press the O ption soft key, and then select De lete soft key.
The LCD screen prompts "Delete selected paging group?".
4. Press the O K soft key to accept the change or the Cancel soft key to cancel.
If you want to delete all paging groups, you can press the De l All soft key.
You can also configure the phone to use a default codec for sending multicast RTP
stream via web user interface.
To configure a default codec for multicast paging via web user interface:
1. Click on F e atures->General Information.
2. Select the desired codec from the pull-down list of Multicast Codec.
The default codec is G722.
Advanced Phone Features
117