Removing Options From A Model 30 And 38 Workstation; Purpose - Digital Equipment VAXstation 3100 Series Upgrade Manual

Removing Options from a Model 30 and 38
The purpose of this chapter is to provide upgrade information so

Purpose

that a Digital service representative or knowledgeable Digital
customer can upgrade an existing VAXstation 3100 Model 30 or
38 workstation to a VAXstation 4000 Model 60 or 90 workstation.
This chapter describes how to remove options from a Model
Chapter
30 and Model 38 workstation. These two models are very
Content
similar in structure. When there are differences in the upgrade
instructions they are called out with a Note specifying the
differences between the two models. This chapter contains the
following information:
•
•
Only a Digital service representative or qualified
self–maintenance customer should perform this
upgrade. You must have a working knowledge of and
experience working on the internal hardware devices
of a VAXstation 3100 system. If you are not qualified
to perform this upgrade, call your Digital service
representative to schedule an upgrade.
Removing Fixed Disk Drives
Removing the Ethernet ROM
Removing Options from a Model 30 and 38 Workstation 2–1
Workstation
Caution:
2