Control Techniques Commander SE Advanced User's Manual page 24

1.48
1.49
Indicates the reference currently being selected.
1 Analog reference 1 selected
2 Analog reference 2 selected
3 Preset reference selected
4 Keypad reference selected
5 Precision reference selected
1.50
Indicates the preset currently being selected. If 1.49 = 1 or 2 then a value of 1 indicates that one of the analog references is
being selected.
1.51
Selects the value of the keypad reference on power-up.
0 0
1 LASt
2 PrS1
24
Unused parameter
Reference selected indicator
1 ~ 5
Preset selected indicator
1 ~ 8
Power-up keypad reference
0 ~ 2 0
keypad reference is zero
keypad reference is the last used value
keypad reference is copied from preset speed 1 (parameter 1.21)
RO Uni
RO Uni
RW Uni Txt
Commander SE Advanced User Guide
P
P
Issue Number: 4