Logging Out - GE MiCOM P40 Agile Technical Manual

Chapter 19 - Cyber-Security
4.8

LOGGING OUT

If you have been configuring the IED, you should 'log out'. Do this by going up to the top of the menu tree. When
you are at the Column Heading level and you press the Up button, you may be prompted to log out with the
following display:
You will only be asked this question if your password level is higher than the fallback level.
If you confirm, the following message is displayed for 2 seconds:
Where # is the current fallback level.
If you decide not to log out, the following message is displayed for 2 seconds.
where # is the current access level.
472
DO YOU WANT TO
LOG OUT?
LOGGED OUT
Access Level #
LOGOUT CANCELLED
Access Level #
P14x
P14xEd1-TM-EN-1