Overview - GE MiCOM P40 Agile Technical Manual

Feeder management ied
Hide thumbs Also See for MiCOM P40 Agile:
Table of Contents

Advertisement

P14x
1

OVERVIEW

In the past, substation networks were traditionally isolated and the protocols and data formats used to transfer
information between devices were often proprietary.
For these reasons, the substation environment was very secure against cyber-attacks. The terms used for this
inherent type of security are:
Security by isolation (if the substation network is not connected to the outside world, it cannot be accessed
from the outside world).
Security by obscurity (if the formats and protocols are proprietary, it is very difficult to interpret them).
The increasing sophistication of protection schemes, coupled with the advancement of technology and the desire
for vendor interoperability, has resulted in standardisation of networks and data interchange within substations.
Today, devices within substations use standardised protocols for communication. Furthermore, substations can be
interconnected with open networks, such as the internet or corporate-wide networks, which use standardised
protocols for communication. This introduces a major security risk making the grid vulnerable to cyber-attacks,
which could in turn lead to major electrical outages.
Clearly, there is now a need to secure communication and equipment within substation environments. This
chapter describes the security measures that have been put in place for our range of Intelligent Electronic Devices
(IEDs).
Note:
Cyber-security compatible devices do not enforce NERC compliance, they merely facilitate it. It is the responsibility of the user
to ensure that compliance is adhered to as and when necessary.
This chapter contains the following sections:
Overview
The Need for Cyber-Security
Standards
Cyber-Security Implementation
P14xEd1-TM-EN-1
Chapter 19 - Cyber-Security
457
458
459
463
457

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents