Regulatory Compliance; Emc Compliance: 2014/30/Eu; Lvd Compliance: 2014/35/Eu; R&Tte Compliance: 2014/53/Eu - GE MiCOM P40 Agile Technical Manual

Feeder management ied
Hide thumbs Also See for MiCOM P40 Agile:
Table of Contents

Advertisement

Chapter 2 - Safety Information
6

REGULATORY COMPLIANCE

Compliance with the European Commission Directive on EMC and LVD is demonstrated using a technical file.
6.1

EMC COMPLIANCE: 2014/30/EU

The product specific Declaration of Conformity (DoC) lists the relevant harmonised standard(s) or conformit
assessment used to demonstrate compliance with the EMC directive.
6.2

LVD COMPLIANCE: 2014/35/EU

The product specific Declaration of Conformity (DoC) lists the relevant harmonized standard(s) or conformity
assessment used to demonstrate compliance with the LVD directive.
Safety related information, such as the installation I overvoltage category, pollution degree and operating
temperature ranges are specified in the Technical Data section of the relevant product documentation and/or on
the product labelling .
Unless otherwise stated in the Technical Data section of the relevant product documentation, the equipment is
intended for indoor use only. Where the equipment is required for use in an outdoor location, it must be mounted
in a specific cabinet or housing to provide the equipment with the appropriate level of protection from the
expected outdoor environment.
6.3
R&TTE COMPLIANCE: 2014/53/EU
Radio and Telecommunications Terminal Equipment (R&TTE) directive 2014/53/EU.
Conformity is demonstrated by compliance to both the EMC directive and the Low Voltage directive, to zero volts.
6.4

UL/CUL COMPLIANCE

If marked with this logo, the product is compliant with the requirements of the Canadian and USA Underwriters
Laboratories.
The relevant UL file number and ID is shown on the equipment.
6.5

ATEX COMPLIANCE: 2014/34/EU

Products marked with the 'explosion protection' Ex symbol (shown in the example, below) are compliant with the
ATEX directive. The product specific Declaration of Conformity (DoC) lists the Notified Body, Type Examination
Certificate, and relevant harmonized standard or conformity assessment used to demonstrate compliance with
the ATEX directive.
The ATEX Equipment Protection level, Equipment group, and Zone definition will be marked on the
product.
For example:
24
P14x
P14xEd1-TM-EN-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents