P14x
3.7
NEGATIVE SEQUENCE OVERCURRENT PROTECTION
IDMT pick-up
DT pick-up
Drop-off (IDMT + DT)
IDMT operate
DT operate
DT Reset
3.7.1
NPSOC DIRECTIONAL PARAMETERS
Directional boundary pick-up (RCA +/-90%)
Directional boundary hysteresis
Directional boundary repeatability
3.8
CIRCUIT BREAKER FAIL AND UNDERCURRENT PROTECTION
I< Pick-up
I< Drop-off
Timers
Reset time
3.9
BROKEN CONDUCTOR PROTECTION
Pick-up
Drop-off
DT operate
Reset time
3.10
THERMAL OVERLOAD PROTECTION
Thermal alarm pick-up
Thermal overload pick-up
Cooling time accuracy
Repeatability
Note:
Operating time measured with applied current of 20% above thermal setting.
P14xEd1-TM-EN-1
Chapter 23 - Technical Specifications
1.05 x Setting +/-5%
Setting +/- 5%
0.95 x Setting +/-5%
+/- 5% or 40 ms, whichever is greater
+/- 2% or 60 ms, whichever is greater
Setting +/- 5%
+/-2°
< 2°
< 2%
Setting +/- 5% or 20 mA, whichever is greater
100% of setting +/- 5% or 20 mA, whichever is greater
+/- 2% or 50 ms, whichever is greater
< 35 ms
Setting +/- 2.5%
0.95 x Setting +/- 2.5%
+/- 2% or 40 ms, whichever is greater
<25 ms
Calculated trip time +/- 10%
Calculated trip time +/- 10%
+/- 15% of theoretical
<5%
539