GE Medical Systems MAC 1200 Operator's Manual page 92

6-6
Recording in 6 Lead Mode: Recording
The locations of all relevant device settings are shown below:
Operating mode Muscle filter
2
Report function
Failure message
1. if enabled
2. or REC OFF when the recording function is disabled
3. if any
„
If you change the writer speed, lead group or any filter settings
during a recording, the unit will briefly stop.
„
With you advance to the next group of 6 leads of the selected
lead
report sequence.
„
When the anti-drift system is enabled, there will be a short delay of
2.2 seconds before the recording starts.
The heart rate limit is automatically calculated from the date of birth
(WHO 100% = 220 - age). When the date of birth is not entered, the unit
will set the limit at 180 bpm. This value can be changed with
(in steps of 5 bpm).
MAC 1200
2012250-022
1 1
AC line filter Anti-drift system
Gain
Three leads
display here
3
1
"Patient Name"
Report sequence
Heart rate
and
Revision B