Enable Password Protection; Test Data; Restore Defaults; Print Setup Lists - GE Medical Systems MAC 1200 Operator's Manual

Enable Password Protection

Test Data

Restore Defaults

Print Setup Lists

Revision B
System Setup: System Setup
Select Yes to protect the setup menu with a password. You will be asked
to enter a password and to repeat it. Then password protection is active.
To change the password (only possible when password protection is
active), do the following.
1. Select menu item Enable password.
2. Enter new password.
3. Verify the new password.
Used for demonstration purposes (yes). It should be set to [no] (default)
for proper clinical use.
Selecting Yes will restore the factory default settings (including the
defaults of the three operating modes).
The electrocardiograph must be switched off and on again for the new
settings to become effective.
Selecting Yes will display a menu with all available setup lists.
„
All lists
„
System Setup (Communication/Peripheral Devices/Patient Data
Setup)
„
12 Lead
„
6 Lead
„
Stress Test
„
Arrhythmia
MAC 1200
2012250-022
9-23