GE Medical Systems MAC 1200 Operator's Manual page 42

3-10
Operating and Performance Tests: Connecting Peripheral Equipment
The electrocardiograph can be directly connected via the serial interface
to a PC (CardioSoft), to the CardioSys system, or to a MUSE CV system.
Resting ECGs acquired in the 12 Lead mode, and the corresponding data,
can then be transmitted to these peripheral devices. See Chapter 5,
"ECG Transmission"
The table below shows the factory defaults and all possible adjustments.
For instructions on changing the default setup, see
page 9-25 for details.
Parameter
Choices for Modem —> Other
Choices for Modem —> other
Phone Number
Initial. modem
dial string hang-
up
Choices for Modem —> MultiTech, Elsa
Dial mode
Phone Number
Outside line
MAC 1200
2012250-022
section for details.
Table 2. Modem Configuration Menu
Factory Default
no
AT&FM1X3S
0=1V0
ATDT
+++ATH
Tone
"Communication" on
Options
other
MultiTech 19.2
MultiTech 56k
Elsa 14.4
Elsa 28.8
Elsa 33.6
Elsa 56k
Pulse
0 to 9 (20 digits)
0 to 9 (20 digits)
Revision B