Pin Dialing - GE Medical Systems MAC 1200 Operator's Manual

PIN Dialing

9-26
System Setup: Communication
The MAC 1200 can be set up so a facility can dial in with a PIN (Personal
Identification Number) and a calling card.
To enable the PIN dialing function, follow these steps.
1. Within the Communication Setup window, select the appropriate
modem.
2. Move the cursor to the prompt PIN Dialing.
3. Select Yes.
4. Enter information for the following fields:
*
Delay (dd)
Service provider (sssss)
PIN (pppppppp)
Phone number (xxxxx)
Outside line (yyyyyy)
5. Save this setting by pressing
*The Delay field hold two digits, and its value ranges from 1 to 10. This
has to be set by the service provider.
MAC 1200
2012250-022
.
Revision B