Setting Up The Broadcast Analog Output Parameters (Model 7711Hdc-Sn-Eaes4 Only); Setting The Composite Display Mode - Colour Or Monochrome; Setting The Analog Video Output Level - evertz 7700 Manual

6.9. SETTING UP THE BROADCAST ANALOG OUTPUT PARAMETERS
(MODEL 7711HDC-SN-EAES4 ONLY)
The 7711HDC-SN-EAES4 version provides a broadcast analog output in addition to the standard SDI and
Monitor Analog outputs.
associated with the broadcast analog output. The menu is not available on the 7711HDC-S version. The
chart below shows the items available in the Broadcast Analog Output menu. Sections 6.9.1 to 6.9.7 give
detailed information about each of the parameters.
Composite Display
Output Level
Hue
Saturation
Contrast
Brightness
NTSC Setup Pedestal
Line 21 Setup Pedestal
6.9.1. Setting the Composite Display Mode – Colour or Monochrome
Broadcast Analog
Output
Composite display
Colour
B/W

6.9.2. Setting the Analog Video Output Level

Broadcast Analog
Output
Output level
-120 to 56
0
The Broadcast Analog Output menus are used to configure parameters
Controls whether the analog video output will be colour or monochrome.
Sets the analog video output level.
Sets the analog video hue level.
Sets the analog video saturation level.
Sets the analog video contrast level.
Sets the analog video brightness level.
Sets whether the NTSC setup pedestal will be on the broadcast analog
video output.
Sets whether the NTSC setup pedestal will be on line 21 on the broadcast
analog video output.
If monochrome operation is desired on the composite output, colour may be
turned off with this control.
This control allows the user to adjust the output level of the analog video.
When set to 0, the nominal output video level will be 100 IRE.
Revision 1.1
7711HDC HD Broadcast Quality Down Converter
7700 MultiFrame Manual
7711HDC - 29