Zeroing The Sensor; In Process Calibration - Emerson Rosemount 1066 Instruction Manual

Section 9: Calibration
April 2017
The following sub-sections provide you with the initial display screen that appears for each calibra-
tion routine. Use the flow diagram for Ozone calibration at the end of
prompts to complete calibration.
The adjacent screen appears after selecting Ozone calibration:

Zeroing the Sensor

9.8.1
The following screen will appear during Zero Cal
The following screen will appear if In Zero Cal is successful. The screen will
return to the Amperometric Cal Menu.
The following screen may appear if In Zero Cal is unsuccessful. The screen
will return to the Amperometric Cal Menu.
9.8.2

In Process Calibration

The following screen will appear after selecting In Process Cal
If the In Process Cal is successful, the screen will return to the Cal sub-
menu. The following screen may appear if In Zero Cal is unsuccessful. The
screen will return to the Amperometric Cal Menu.
84
Instruction Manual
LIQ-MAN-1066
Section 9 and the live screen
1.234 µS/cm 25.0 ºC
SN Calibration
Zero Cal
In Process Cal
1.234 nA
SN Zero Cal
Zeroing
Wait
1.234 nA
SN Zero Cal
Sensor zero done
1.234 nA
SN Zero Cal
Sensor zero failed
Press EXIT
1.234 µS/cm 25.0 ºC
SN InProcess Cal
Wait for stable
reading.
1.234 µS/cm 25.0 ºC
SN InProcess Cal
Calibration
Error
Press EXIT
Calibration