Menu System - Emerson Rosemount 1066 Instruction Manual

Instruction Manual
LIQ-MAN-1066
The default display shows the live process measurement in the upper display area and temperature
in the center display area. The user can elect to disable the display of temperature in the center dis-
play area using the Main Format function. See
main display to select process parameters and diagnostics of your choice.
6.4

Menu System

The 1066 uses a scroll and select menu system.
Pressing the MENU key at any time opens the
top-level menu including Calibrate, Hold,
Program and Display functions.
To find a menu item, scroll with the up and
down keys until the item is highlighted.
Continue to scroll and select menu items until
the desired function is chosen.
To select the item, press ENTER. To return to a
previous menu level or to enable the main live
display, press the EXIT key repeatedly. To return
immediately to the main display from any menu level, simply press MENU then EXIT.
The selection keys have the following functions:
• The Up key (above ENTER) increments numerical values, moves the decimal place one place
to the right, or selects units of measurement.
• The Down key (below ENTER) decrements numerical values, moves the decimal place one
place to the left, or selects units of measurement
• The Left key (left of ENTER) moves the cursor to the left.
• The Right key (right of ENTER) moves the cursor to the right.
To access desired menu functions, use the Quick Reference. During all menu displays (except main
display format and Quick Start), the live process measurement and temperature value are dis-
played in the top two lines of the Upper display area. This conveniently allows display of the live val-
ues during important calibration and programming operations. Menu screens will time out after
two minutes and return to the main live display.
Display and Operation
Section 6: Display and Operation
Figure 4-1 to guide you through programming the
April 2017
35