About This Document - Emerson Rosemount 1066 Instruction Manual

3. The surface resistivity of the non-metallic enclosure materials is greater than one gigaohm.
Care must be taken to avoid electrostatic charge build-up. The Model 1066 Transmitter must
not be rubbed or cleaned with solvents or a dry cloth.
4. Special Condition of Use of 1066 C FF/FII5 and 1066T FF/FII5. For use with simple apparatus
model series 140, 141, 142, 150, 400, 401, 402, 402VP, 403, 403VP, 404, and 410VP contact-
ing conductivity sensors and model series 222, 225, 226, 228 toroidal sensors.

About this document

This manual contains instructions for installation and operation of the 1066 Smart Transmitter.
The following list provides notes concerning all revisions of this document.
Rev. level
A
B
C
D
E
F
G
H
J
II
Date Notes
1/2012 This is the initial release of the product manual. The manual
has been reformatted to reflect the Emerson documentation
style and updated to reflect any changes in the product offering.
3/2012 This product manual version adds specifications and instrument
instructions for Contacting Conductivity, Toroidal Conductivity,
Chlorine, Oxygen, and Ozone measurements.
9/2012 This product manual version adds FM agency approval.
3/2013 Updated CSA Intrinsically Safe Installation drawings.
7/2013 Updated CSA test Standards and Intrinsically Safe installation
drawings and update CE certificates. Added FM temperature
specifications to Non-Incendive Hazardous Location Approval.
9/2013 Added Section 10: HART
11/2014 Changed agency water exposure testing description to "Type".
05/2015 FM approvals updated.
04/2017 Updated the Address and Emerson logo. Also, updated the FM,
CSA installation drawings and CE Declarations.
Communications
®