Measure; Units; Filter; Free Chlorine Ph Correction - Emerson Rosemount 1066 Instruction Manual

Section 8: programming Measurements
April 2017
8.6.1.1

Measure

The display screen for selecting the measurement is shown. The default
value is displayed in bold type. Refer to the Chlorine Programming flow
diagram to complete this function.

Units

8.6.1.2
The display screen for selecting units as ppm or mg/L is shown. The
default value is displayed in bold type.
Programming flow diagram to complete this function.
8.6.1.3

Filter

The display screen for entering the input filter value in seconds is shown.
The default value is displayed in bold type. Refer to the Chlorine
Programming flow diagram to complete this function.
8.6.1.4

Free Chlorine pH Correction

The display screen for Selecting Live/Continuous pH correction or
Manual pH correction is shown. The default value is displayed in bold
type. Refer to the Chlorine Programming flow diagram to complete this
function.
8.6.1.5

Manual pH Correction

The display screen for manually entering the pH value of the measured
process liquid is shown. The default value is displayed in bold type. Refer
to the Chlorine Programming flow diagram to complete this function.

Resolution

8.6.1.6
The display screen for selecting display resolution as 0.001 or 0.01 is
shown. The default value is displayed in bold type. Refer to the Chlorine
Programming flow diagram to complete this function.
54
Refer to the Chlorine
Instruction Manual
LIQ-MAN-1066
1.234 µS/cm 25.0 ºC
SN Measurement
Total Chlorine
Free Chlorine
Monochloramine
1.234µS/cm 25.0ºC
SN Units
mg/L
ppm
1.234 µS/cm 25.0 ºC
SN Input filter
05 sec
1.234 µS/cm 25.0 ºC
SN Free Cl
pH Correction
Manual
Live/Continuous
1.234 µS/cm 25.0 ºC
SN Manual pH
07.00 pH
1.234 µS/cm 25.0 ºC
SN Resolution -
0.01
0.001
Programming Measurements