Emerson Rosemount 1066 Instruction Manual page 122

Section 10: haRT Communication
April 2017
1066C
electrode_type
Type of contacting conductivity sensor being used by the transmitter.
cond_range
Selects a particular range for the conductivity measurement or
automatic ranging for 2 and 4 electrode sensors.
series_cap_correction
Turns capacitance correction on and off.
cell_factor
The second calibration constant used by a 4 electrode sensor in
addition to cell constant.
temp_comp_type
The type of temperature compensation used by the transmitter.
temp_comp_slope
Provides a slope value used in linear temperature compensation.
reference_temperature
The temperature that temperature compensation corrects to. It is
usually 25 °C.
1066T
toroidal_sensor_model
Selects the model of toroidal sensor being used for enhanced
accuracy.
cond_range
Selects a particular range for the conductivity measurement or auto-
matic ranging for toroidal sensors.
temp_comp_type
The type of temperature compensation used by the transmitter.
temp_comp_slope
Provides a slope value used in linear temperature compensation.
reference_temperature
The temperature that temperature compensation corrects to. It is
usually 25 °C.
112
Type Enumeration /
Range
ENUM 2-Electrode
4-Electrode
ENUM
2-Electrode: Automatic
0-50 µS
40-500 µS
400-2000 µS
1.8-20 mS
18-200 mS
4-Electrode: Automatic
0-42μS
36-200μS
180-1000μS
0.9-10mS/cm
9-600mS/cm
ENUM Off
On
FLOAT
ENUM Linear slope
Neutral salt
Cation
Raw / None
FLOAT 0.2 -- 9.99 % / °C
FLOAT
Type Enumeration
Read/Write
/ Range
ENUM 228 R / W
225
226
247
Other
ENUM Automatic R / W
50-600 µS
0.5-100 mS
90-1500 mS
ENUM Linear slope R / W
Raw / None
FLOAT R / W
FLOAT R / W
Instruction Manual
LIQ-MAN-1066
Default
Read/
Write
R / W 2-Electrode
R / W Automatic
R / W Off
R / W 0.95 /cm
R / W Linear slope
R / W 2.0% / °C
R / W 25 °C
Default
228
Automatic
Linear slope
2.0% / °C
25 °C
HART Communications