Ordering Information - Emerson Rosemount 1066 Instruction Manual

Instruction Manual
LIQ-MAN-1066

Ordering Information

2.9
The 1066 2-Wire Transmitter is intended for the continuous determination of pH, ORP (Redox),
conductivity, (both contacting and toroidal), and for measurements using membrane-covered
amperometric sensors (oxygen, ozone, free and total chlorine, and monochloramine). For free
chlorine measurements, which often require continuous pH correction a second input for a pH
sensor is available. Two 4-20mA analog outputs are standard on HART units. The 1066 is compat-
ible with SMART pH sensors from Rosemount. HART digital communications is standard and
F
OUNDATION
Communication with the 1066 is through:
Local keypad interface
475 HART
HART protocol version 7
F
OUNDATION
AMS (Asset Management Solutions) Aware
SMART Wireless THUM
TaBlE 2-3. Ordering Information
Description
1066 ph/ORp, Conductivity, Chlorine, Oxygen, and Ozone 2-Wire Transmitter
Measurement
Communication
agency approval
Specifications
fieldbus digital communication is offered as an option.
®
and F fieldbus Communicator
®
OUNDATION
fieldbus
Adapter
™
P pH/ORP
C Contacting Conductivity
T Toroidal Conductivity
CL Chlorine
DO Dissolved Oxygen
OZ Ozone
HT HART® Digital Communication Superimposed on 4-20mA Output
FF FOUNDATION™ fieldbus Digital Output
FI FOUNDATION™ fieldbus Digital Output with FISCO
60 None Required
FM Approved, Intrinsically Safe (appropriate sensor & safety barrier
67
required), and Non-Incendive
CSA Approved , Intrinsically Safe (appropriate sensor & safety barrier
69
required), and Non-Incendive
73 ATEX/IECEx Approved, Intrinsically Safe (safety barrier required)
Section 2: Description and Specifications
April 2017
11