How To Correct The Postage Amount (Running Mail) - Neopost IS-480 User Manual

Running Mail
To run mail, follow the procedure below after you have completed the steps in
Requirements
p.61.

How to Correct the Postage Amount (Running Mail)

How to Correct
the Postage
Amount
(Running Mail)
You are now ready to print the envelopes.
To print the additional amount stamp:
1
Press . The system motors start running.
Before printing, turn the envelope to print on a free area.
2
Insert the mail piece(s) into the mail path against the rear-
guide wall, side to be printed facing upwards (see
Use the Feeder
If mail piece is bigger than mail path maximum thickness (see
Mail Specifications
p.239), press
print a label. The label is printed.
The Mailing System applies postage and the mail piece (or
label) is sent to the catch tray.
Otherwise, if you want to print several identical labels:
1
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Filling the Label Dispenser
2
Press to print labels.
p.38).
p.93).
Set-Up
How to
before you press
3
to
63