Neopost IS-480 User Manual page 51

3
44
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
p.239), press
label is printed.
The Mailing System prints postage and the mail piece (or
label) is sent to the catch tray.
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
If you want to print several identical labels:
1
Press and enter the number of labels.
Make sure the labels are available in the label dispenser (see
Filling the Label Dispenser
2
Press to print the labels.
Differential Weighing
In optional mode
From the [Standard] home screen, to print postage on mail
pieces:
1
Place the stack of mail you want to process on the Weighing
Platform, and then follow the instructions on the screen or the
steps below.
2
Withdraw the first mail piece from the top of the stack. The
Mailing System displays weight and postage on the home
screen and starts motors automatically.
3
To print the stamp, insert
the mail piece into the
base against the rear-
guide wall, with the side
to be printed
upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
p.239), press
label is printed.
The Mailing System applies postage and the mail piece (or
to print a label. The
p.93).
(
facing
to print a label. The
)