Default Sealing Mode; How To Set The Default Sealing Mode; How Set The Current Sealing Mode - Neopost IS-480 User Manual

Default Sealing Mode

8.11 Default Sealing Mode

As supervisor, you can set the default sealing Mode (ON or OFF).

How to Set the Default Sealing Mode

How to Set the
Default Sealing
Mode
Changing the Current Sealing Mode
As a user, you can change the current sealing state as follows.

How Set the Current Sealing Mode

How Set the
Current Sealing
Mode
This setting is used only if the Mixed-Size Feeder is connected.
To modify the Default Sealing Mode:
1
As supervisor (see
Press
> Default User Settings > Base settings > Default sealing
2
Change the default sealing state as required.
3
Press [OK] to validate.
To change the sealing Mode:
1
As a user:
Press
> Job settings > Sealing
Sealing
The screen is displayed.
2
ON/OFF
Press the
state and press [OK] to validate.
How to Log in as Supervisor
and type 3.2.6 or select the path:
and type 2.5 or select the path:
key (or type 1 ) to change the sealing
p.164):
8
187