How To Change System Time-Outs - Neopost IS-480 User Manual

Setting Default Time-Outs

How to Change System Time-Outs

How to Change
System Time-
Outs
8
170
3
Press [OK] to exit.
This is a user setting that only lasts as long as you are logged in.
To change the system time-Outs:
1
As Supervisor (see
The Timeout setting
2
Select each field and specify the length of each the time-out.
Use the [C] key to clear old settings then enter a new value.
3
Press [OK] to validate.
How to Log in as Supervisor
screen is displayed.
p.164)