How To Correct Date On Mail (Running Mail) - Neopost IS-480 User Manual

Running Mail
To run mail, follow the procedure below after you have completed the steps in
Requirements
p.58.

How to Correct Date on Mail (Running Mail)

How to Correct
Date on Mail
(Running Mail)
Select [Date correction] and press [OK] to validate
3
Change the postage date.
Today's date is printed by default. To change the date, press
to access the
Date Advance
to display the
Select a date.
- Press
- For details, see
Other possible settings:
1
You can shift the imprint position on the envelopes for en-
velopes with a steep edge (print offset).
See How to Move the Stamp (Print Offset)
2
You are now ready to print the envelopes.
To print the new date stamp:
1
Press . The system motors start running.
Before printing, turn the envelope to print on a free area.
2
Insert the mail piece(s) into the mail path against the rear-
guide wall, side to be printed facing upwards (see
Use the Feeder
Imprint
screen, and then select > Date
Screen.
to return to the home screen.
How to Change the Date
p.38).
p.78.
p.81.
Set-Up
How to
59
3