Amount Correction] Mode (If Available); How To Correct The Postage Amount (Settings) - Neopost IS-480 User Manual

[Amount Correction] Mode (if available)

3.6 [Amount Correction] Mode (if
available)
In this Section
This section describes the settings and mail handling sequence for the mail process
that require the Type of stamp [Amount correction].
Use this type of stamp to correct the postage amount. Only additions are possible (to
increase the postage amount).
You must begin with selecting the Type of stamp to gain access to the corresponding
settings and be able to run mail.
See also
p.36.
•
Set-Up Requirements
The procedure below outlines steps required to correct postage amount.

How to Correct the Postage Amount (Settings)

How to Correct
the Postage
Amount
(Settings)
Make sure you have completed the preparation steps mentioned
Preparing and Starting your Work Session
in
Required settings:
1
Make sure you are on the home screen of the [Amount Cor-
rection] type of stamp. The home screen indicates the date
as illustrated below.
2
To change the type of stamp, press
stamp
screen, and then press [OK] to display the
stamp
screen.
p.32.
Built
to access the
Type of
3
61