How To Correct The Postage Amount (Settings) - Neopost IS-480 User Manual

Correcting a Postage Amount (if available)
Set-Up Requirements
The procedure below outlines steps required to correct the postage amount on mail
that has already been processed.
The sequence is identical to
the following:
3
Postage must be set to the desired additional amount, instead of
•
Print the new postage on the back of the envelope.
•

How to Correct the Postage Amount (Settings)

How to Correct
the Postage
Amount
(Settings)
48
[Date Correction] Mode (if available)
Make sure you have already completed the preparation steps
Preparing and Starting your Work Session
mentioned in
Required settings:
1
Make sure you are on the home screen of the [Standard]
type of stamp. The type of stamp is indicated at the top of the
home screen as illustrated below.
2
Check or change the type of stamp.
Press to access the
To change the type of stamp, select
select [Standard] in the
How to Change the Current 'Type of Stamp'
details, see
p.36.
(p.40), except for
0
Customize stamp
Stamp type
Type of stamp
screen. For more
.
p.32.
screen:
and then