Entering Postage Value And Mail Processing; Entering Postage Value; Manually; With An External Scale - Neopost IJ65 Manual

4.

4.1 Entering postage value

Press key
postage value required, using the numeric keys. In case of error, press
C
selected to print on envelope.
Place a mail item on the external scale and press "Set Meter" or
"Print Tape" to transmit the calculated value to the franking machine.
When a dynamic scale is present, mode transport should be
selected to print on envelope.
- From the main screen, press on
- Press on
where:
4124543Y/D
14/03/2007
ENTERING POSTAGE
PROCESSING

4.1.1 Manually

C
if a value different from zero is displayed and enter the
. When a dynamic scale is present, mode transport should be

4.1.2 With an external scale

4.1.3 With a dynamic scale

Do not lean on or disturb the system while it is processing
in the dynamic weighing mode; it will affect the amount
of postage applied to the mail.
displayed; press on
SCALE
of the dynamic scale"), using arrows
press on to confirm the selection.
OK
, until
NEXT
the screen below appears:
RATE
MENU MORE

Entering Postage Value and Mail Processing

VALUE
, until
NEXT
to select a mode (see section "Use
and
is displayed; press on
RATE
0 USER RATE
1 2nd Class
2 Inland 1st Class Rec
3 2nd Class Recorded
4 Spec Del 2500
5 Eu Air Letters
6 OSEu Air Let Z1
IJ850016-31
AND MAIL
is
SCALE
, and
;
RATE
OK
31