How To Change System Time-Outs - Neopost IN-600 User Manual

| Page 161 | Nov-12-2015 10:25 |

How to Change System Time-Outs

To change the system time-outs:
1. As Supervisor (see How to Log in as Supervisor
Press and select the path:
Time-out settings
The Timeout setting screen is displayed.
2. Select each field and specify the length of each the time-out.
Use the [C] key to clear old settings then enter a new value.
3. Press [OK] to validate.
Smart Start
The Smart Start function detects when you are removing a mail piece from the weighing
platform and automatically starts the system motors without you having to press the
key.
on page 152)
Default user settings System settings
8
161