Platform Control And Indicator Panel; Platform Control/Indicator Panel - JLG 1230ES Operation And Safety Manual

Platform Control and Indicator Panel

NOTE: The platform control and indicator panel uses different
shaped symbols to alert the operator to different types of
operational situations that could arise. The meaning of
those symbols are explained below.
Tilt Indicator Warning Light - Indicates
a potentially hazardous situation, which if
not corrected, could result in serious
injury or death. This indicator will be red.
System Distress Indicator - Indicates an
abnormal operating condition, which if
not corrected, may result in machine
interruption or damage. This indicator
will be yellow. *(SEE NOTE BELOW)
NOTE: * This lamp when activated is flashing a DTC (Diagnostic
Troubleshooting Code). For an explanation of these codes
and items the Operator can or cannot correct, see Section
6, GENERAL SPECIFICATIONS AND OPERATOR MAINTE-
NANCE, sub-Section 6.1, DIAGNOSTIC TROUBLE CODES
(DTC).
3121221
SECTION 3 - MACHINE CONTROLS AND INDICATORS
Figure 3-8. Platform Control/Indicator Panel
1. System Distress Indicator
2. Battery Discharge Indicator (BDI)
3. Tilt Indicator Warning Light
4. Platform Lift Mode Indicator
NOTE: The button and indicators shown shaded on the indicator panel are currently
not used on the 1230ES machine.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL
LEVERS OR TOGGLE SWITCHES CONTROLLING ANY MACHINE FUNCTIONS DO
NOT RETURN TO THE OFF OR NEUTRAL POSITION WHEN RELEASED.
– JLG Lift –
1 2
3
4 5 6
5. Lift or Drive Select Switch
6. Drive Mode Indicator
7. Horn Button
7
3-9