Help Comments; Check Tables - JLG 1230ES Operation And Safety Manual

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6.2 DIAGNOSTIC TROUBLE CODES (DTC) CHECK TABLES

0-0 Help Comments

DTC FAULT MESSAGE
001 EVERYTHING OK
002 GROUND MODE OK
003 ALARM SOUNDING - TILTED & ABOVE
ELEVATION
004 DRIVING AT CUTBACK - ABOVE ELEVA-
TION
6-12
DESCRIPTION
The normal help message in platform mode.
Displays on the analyzer only.
The normal help message in ground mode.
Displays on the analyzer only.
Control system senses that the platform is
elevated and the vehicle is tilted, and the
machine not configured to cutout.
The platform is elevated and the machine is
driving.
– JLG Lift –
CHECK
• Check that the machine is tilted. If so, lower the platform and reposition
the machine to a level surface.
• Fully stow the platform.
• The tilt sensor is part of the ground control box. Check that the ground
control box is secured to the machine.
• Check that the pothole protection switches are securely mounted.
• Check that the elevation angle sensor is securely mounted.
Refer problem to a qualified JLG mechanic.
• Fully stow the platform.
• Check that the elevation angle sensor is securely mounted.
• Check that the pothole protection switches are securely mounted.
Refer problem to a qualified JLG mechanic.
3121221