Hardware - JLG 1230ES Operation And Safety Manual

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE

9-9 Hardware

DTC FAULT MESSAGE
991 LSS WATCHDOG RESET
992 LSS EEPROM ERROR
993 LSS INTERNAL ERROR - PIN EXCITATION A problem has been detected with the load
994 LSS INTERNAL ERROR - DRDY MISSING
FROM A/D
995 POWER MODULE FAILURE - PERSONAL-
ITY RANGE ERROR
996 POWER MODULE FAILURE - INTERNAL
ERROR
997 POWER MODULE FAILURE - CHECK
POWER CIRCUITS OR MOSFET SHORT
CIRCUIT
998 EEPROM FAILURE - CHECK ALL SET-
TINGS
999 FUNCTION LOCKED OUT - POWER MOD-
ULE SOFTWARE VERSION IMPROPER
6-26
DESCRIPTION
A problem has been detected with the load
sense system.
A problem has been detected with the load
sense system.
sense system.
A problem has been detected with the load
sense system.
A problem has been detected with the
power module.
A problem has been detected with the
power module.
A problem has been detected with the
power module.
A problem has been detected with the
ground board.
The power module software version is not
compatible with the rest of the system.
– JLG Lift –
CHECK
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
Refer problem to a qualified JLG mechanic.
3121221