Operating Specifications; Operating Specification - JLG 1230ES Operation And Safety Manual

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6.1

OPERATING SPECIFICATIONS

Table 6-1. Operating Specification
DESCRIPTION
PLATFORM
Maximum Platform Height
DRIVING
Maximum Drive Speed
Maximum Stowed Travel Grade (Gradeability)
(Reference Figure 4-12. on page 4-14)
Maximum Stowed Travel Grade (Sideslope)
(Reference Figure 4-12. on page 4-14)
Maximum Elevated Travel Grade (Gradeability)
Maximum Elevated Travel Grade (Sideslope)
Inside Turning Radius
Outside Turning Radius
6-2
MODEL 1230ES
12 ft. (3.66 m)
Stowed 3 mph (4.8 kph)
0.5 mph (0.8 kph)
Elevated
25% (14°)
5°
3° - ANSI
3.4° - CE
1.5° - ANSI
3.4° - CE
4.4 in. (11.2 cm)
57.6 in. (1.46 m)
Table 6-1. Operating Specification (Continued)
DESCRIPTION
CHASSIS
Approximate Gross Machine Weight -
ANSI/CSA/CE/Australia
Maximum Tire Load (per wheel)
Ground Bearing Pressure
Ground Clearance -
(pot hole protection system up)
(pot hole protection system down)
Maximum Operating Wind Speed
Maximum Horizontal Manual Side Force:
(Platform fully extended with Maximum load)
Maximum Hydraulic Pressure
Electrical System Voltage (DC)
– JLG Lift –
MODEL 1230ES
1740 lb. (790 kg)
880 lb. (400 kg)
2
123 PSI (8.7 kg/cm )
2.6 in (66 mm)
0.5 in (12.2 mm)
ANSI/CSA - 28 mph
CE/AUST - 0 m/s -
Indoor Use Only
ANSI/CSA -100 lb force - (445
Newtons)
CE/AUST - 200 Newtons - (45 lb
force)
1600psi (110 bar)
24V
3121221