Lubrication; Lubrication Capacities; Hydraulic Oil - JLG 1230ES Operation And Safety Manual

6.1

LUBRICATION

Lubrication Capacities

Table 6-7. Capacities
COMPONENT
Hydraulic Tank
Hydraulic System (Including Tank)

Hydraulic Oil

Table 6-8. Hydraulic Oil
HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
0° F to +23° F (-18° C to -5° C)
0° F to 210° F (-18° C to + 99° C)
50° F to 210° F (+10° C to +210° C)
3121221
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
NOTE: The factory installed hydraulic oil (Nervofluid 15) has a
NOTE: Hydraulic oils must have anti-wear qualities at least to API
MODEL 1230ES
0.8 Gal. (3 L)
1.75 Gal (4.1 L)
SAE VISCOSITY GRADE
10W
10W-20, 10W-30
20W-20
– JLG Lift –
BLUE TINT for identification purposes only, but is fully
compatible and can be mixed with any of the JLG recom-
mended hydraulic oils mentioned following.
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service. JLG recommends
Mobilfluid DTE 11M hydraulic oil, which has an SAE viscos-
ity index of 140.
When temperatures remain below 20° F (-7° C), JLG rec-
ommends the use of Mobil DTE13. Aside from JLG recom-
mendations, it is not advisable to mix oils of different
brands or types, as they may not contain the same
required additives or be of comparable viscosities. If use of
hydraulic oil other than Mobilfluid DTE 11M is desired,
contact JLG for proper recommendations.
6-5