JLG 1230ES Operation And Safety Manual page 79

2-2 Platform Controls
DTC FAULT MESSAGE
223 FUNCTION PROBLEM - DRIVE & LIFT
ACTIVE TOGETHER
224 FUNCTION PROBLEM - STEER LEFT PER-
MANENTLY SELECTED
225 FUNCTION PROBLEM - STEER RIGHT
PERMANENTLY SELECTED
226 ACCELERATOR FAULTY - WIPER OUT OF
RANGE
227 STEER SWITCHES FAULTY
228 FUNCTION LOCKED OUT - ACCELERATOR
NOT CENTERED
229 FUNCTION PROBLEM - TRIGGER PER-
MANENTLY CLOSED
2210 TRIGGER CLOSED TOO LONG WHILE IN
NEUTRAL
2232 FUNCTION PROBLEM - DRIVE & LIFT
BOTH OPEN
3121221
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
DESCRIPTION
The drive and lift inputs are closed simulta-
neously in platform mode.
The steer left switch was closed during
power-up in platform mode.
The steer right switch was closed during
power-up in platform mode.
There is a problem with the joystick.
The steer left and steer right inputs were
closed simultaneously.
The joystick was not centered at power-up.
The trigger switch was closed during power-
up in platform mode.
The trigger switch was closed for more than
five seconds while the joystick was centered.
The drive and lift inputs are both de-ener-
gized in platform mode.
– JLG Lift –
CHECK
• Check drive/lift switch for visible damage.
Refer problem to a qualified JLG mechanic.
• Check if the steer left switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Check if the steer right switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Center joystick and check to see if a power cycle will clear DTC.
Refer problem to a qualified JLG mechanic.
• Check if the steer switches are damaged, obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Release joystick and allow to center.
• Check if the joystick is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Check if the trigger switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Check if the trigger switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
• Check if either function is active, if Yes;
Refer problem to a qualified JLG mechanic.
6-15