Trip And Fall Hazards - JLG 1230ES Operation And Safety Manual

Trip and Fall Hazards

• JLG Industries, Inc. recommends that all persons in the plat-
form wear a full body harness with a lanyard attached to an
authorized lanyard anchorage point while operating this
machine. For further information regarding fall protection
requirements on JLG products, contact JLG Industries, Inc.
• Prior to operation, ensure all gates and rails are fastened
and secured in their proper position. Identify the desig-
nated lanyard anchorage point(s) at the platform and
securely attach the lanyard. Attach only one (1) lanyard per
lanyard anchorage point
• Use extreme caution when entering or leaving platform.
Ensure that the platform assembly is fully lowered. Face the
machine when entering or leaving the platform. Always
maintain "three point contact" with the machine, using two
hands and one foot or two feet and one hand at all times
during entry and exit.
3121221
.
• Keep both feet firmly positioned on the platform floor at all
times. Never position ladders, boxes, steps, planks, or simi-
lar items on unit to provide additional reach for any pur-
pose.
• Keep oil, mud, and slippery substances cleaned from foot-
wear and the platform floor.
– JLG Lift –
SECTION 1 - SAFETY PRECAUTIONS
1-5