Raising Platform; Raising Platform From Ground Control - JLG 1230ES Operation And Safety Manual

SECTION 4 - MACHINE OPERATION

Raising Platform

1. If the machine is shut down, place the platform/
ground select switch to the desired position (platform
or ground).
2. Position both the ground control station and platform
control station emergency stop switches to the on
position.
4-8
From Ground Control Station
Figure 4-6. Raising Platform From Ground Control
1. If operating from the ground controls -
Position the lift switch (1) to up and hold until desired
elevation is achieved.
DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSONNEL IN
THE PLATFORM EXCEPT IN AN EMERGENCY.
– JLG Lift –
1
3121221