Inspection And Maintenance Table - JLG 1230ES Operation And Safety Manual

Type
Pre-Start Inspection Before using each day; or
whenever there's an Operator change.
Pre-Delivery Inspection Before each sale, lease, or rental delivery.
(see note below)
Frequent Inspection In service for 3 months or 150 hours, whichever comes
first; or Out of service for a period of more than 3
months; or Purchased used.
Annual Machine Annually, no later than 13 months from the date of
Inspection prior inspection.
(see note below)
Preventative Maintenance At intervals as specified in the Service and Mainte-
nance Manual.
NOTE: Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
JLG INDUSTRIES, INC. RECOGNIZES A FACTORY-CERTIFIED SERVICE TECHNICIAN AS A PERSON WHO HAS SUCCESSFULLY COMPLETED THE JLG SERVICE
TRAINING SCHOOL FOR THE SPECIFIC JLG PRODUCT MODEL.
3121221
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
Table 2-1. Inspection and Maintenance Table
Frequency
User or Operator
Owner, Dealer, or User Qualified JLG
Owner, Dealer, or User Qualified JLG
Owner, Dealer, or User Factory Trained Ser-
Owner, Dealer, or User Qualified JLG
NOTICE
– JLG Lift –
Primary Service
Responsibility Qualification
User or Operator
Mechanic
Mechanic
vice Technician
(Recommended)
Mechanic
Reference
Operator and Safety Manual
Service and Maintenance Manual and
applicable JLG inspection form
Service and Maintenance Manual and
applicable JLG inspection form
Service and Maintenance Manual and
applicable JLG inspection form
Service and Maintenance Manual
2-3