GE G60 Instruction Manual page 767

APPENDIX G
Table G–7: MAJOR UPDATES FOR G60 MANUAL REVISION Y1 (Sheet 3 of 3)
PAGE PAGE CHANGE
(X2) (Y1)
6-1 6-1 Update
6- 6-7 Add
6-11 6-11 Delete
6- 6-12 Add
7- 7-1 Add
7- 7-3 Add
7- 7- Add
7- 7- Add
8- 8-4 Add
A- A- Add
B-8 B-8 Update
C-23 C-23 Update
GE Multilin
DESCRIPTION
Update Actual Values main menu to include Real Time Clock Synchronization submenu
Added new section for Real Time Clock synchronizing consisting of the menu of settings and the
setting descriptions
Deleted section 6.2.19 Ethernet Switch
Added new section 6.2.20 Remaining Connection Status
Added Security command to the Commands main menu
Added Reboot Relay command and description to the Relay Maintenance menu items
Added Security menu and submenu commands and descriptions to the Command menu
Added to Minor self-test error message **Bad PTP Signal**
Added new section for CyberSentry software option with overview and security menu subsections
Added Flexanalog item PTP–IRIG-B Delta to Table A-1: Flexanalog Data Items
Updated Modbus memory map table to include port 0 for Modbus slave address, TCP, DNP,
HTTP, TFTP, MMS, and removed references to COM 1 RS485 port
Updated tables in sections C.6.3 ACSI Services Conformance Statement and C.7.1 Logical
Nodes Table
G60 Generator Protection System
G.1 CHANGE NOTES
G
G-5