GE G60 Instruction Manual page 212

5.2 PRODUCT SETUP
The report control configuration settings are shown below:

PATH: SETTINGS PRODUCT SETUP

CONFIGURABLE REPORT 1
 REPORT 1
 DATASET ITEMS
To create the dataset for logical node LN, program the
attributes supported by the G60. Changes to the dataset will only take effect when the G60 is restarted. It is recommended
to use reporting service from logical node LLN0 if a user needs some (but not all) data from already existing GGIO1,
GGIO4, and MMXU4 points and their quantity is not greater than 64 minus the number items in this dataset.
5
5-52

COMMUNICATIONS

REPORT 1 DATASET ITEMS
ITEM 1:
ITEM 2:
MESSAGE
ITEM 3:
MESSAGE
ITEM 64:
MESSAGE
G60 Generator Protection System
 
IEC 61850 PROTOCOL
Range: all valid MMS data item references
Range: as shown above
Range: as shown above
↓
Range: as shown above
to settings to a value from the list of IEC 61850 data
ITEM 1 ITEM 64
5 SETTINGS
REPORT CONTROL CONFIGURATION
GE Multilin