Configuring The G60 For Software Access - GE G60 Instruction Manual
Ur series generator protection system
Hide thumbs
Also See for G60:
- Instruction manual (768 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (494 pages)
Table of Contents
Advertisement
1 GETTING STARTED
tion, then click the Add Now button to list software items for the product. EnerVista Launchpad then obtains the
software from the Internet or DVD and automatically starts the installation program.
6.
Select the complete path, including the new directory name, where the EnerVista UR Setup is to be installed.
7.
Click the Next button to begin the installation. The files are installed in the directory indicated, and the installation pro-
gram automatically creates icons and adds EnerVista UR Setup to the Windows start menu.
8.
Click Finish to complete the installation. The UR device is added to the list of installed intelligent electronic devices
(IEDs) in the EnerVista Launchpad window, as shown.
a) OVERVIEW
You connect remotely to the G60 through the rear RS485 or Ethernet port with a computer running the EnerVista UR Setup
software. The G60 can also be accessed locally with a computer through the front panel RS232 port or the rear Ethernet
port using the Quick Connect feature.
•
To configure the G60 for remote access via the rear RS485 port, see the Configuring Serial Communications section.
•
To configure the G60 for remote access via the rear Ethernet port, see the Configuring Ethernet Communications sec-
tion.
•
To configure the G60 for local access with a computer through either the front RS232 port or rear Ethernet port, see the
Using the Quick Connect Feature section.
GE Multilin
Figure 1–5: IDENTIFYING THE UR DEVICE TYPE
Figure 1–6: UR DEVICE ADDED TO LAUNCHPAD WINDOW
G60 Generator Protection System
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.3 CONFIGURING THE G60 FOR SOFTWARE ACCESS
1
1-7
Advertisement
Table of Contents
