GE G60 Instruction Manual page 766

G.1 CHANGE NOTES
Table G–7: MAJOR UPDATES FOR G60 MANUAL REVISION Y1 (Sheet 2 of 3)
PAGE PAGE CHANGE
(X2) (Y1)
3-24 3-24 Update
5-1 5-1 Update
5-15 5-15 Update
5-15 5-15 Delete
5-16 5-16 Add
5-17 5-17 Update
5-17 5-17 Update
5-40 5- Delete
5- 5-40 Add
5- 5-42 Add
5- 5- Update
5-37 5- Delete
5- 5-45 Add
5- 5-54 Add
5- 5- Add
5-94 5-94 Update
5- 5-94 Add
5-94 5-94 Update
5- 5-95 Add
5-97 5-95 Update
G
5- 5-96 Add
5- 5-97 Add
5- 5-98 Add
5- 5-98 Add
5- 5-98 Add
5- 5-98 Add
5-100 5-100 Update
5- 5-101 Add
5- 5-101 Update
5- 5-111 Add
5- 5-111 Add
5-111 5-111 Update
5- 5-112 Add
5- 5-113 Add
5- 5-113 Add
5- 5-137 Update
5-141 5-141 Update
5- 5-195 Added
5-272 5-272 Delete
5- 5-296 Add
G-4
DESCRIPTION
Deleted references to COM 1 RS485 port in section 3.2.9 CPU Communication Ports. Revised
text and Figure 3-25 CPU Module Communications Wiring to include only modules T, U, V in
section 3.2.9a.
Updated the front panel main menu to include the CyberSentry security menu
Update Communications main menu to remove the SNTP Protocol submenu
Deleted references to COM 1 RS485 port in section 5.2.4b Serial Ports
Added section 5.2.4c Ethernet Network Topology
Updated Networks section 5.2.4d to include all three Ethernet ports
Added 0 as valid number to section 5.2.4e Modbus Protocol section
Deleted Local Time Offset, Daylight Savings Time, DST (start/stop for month/day/hour) from Real
Time Clock menu
Added submenus Precision Time Protocol, SNTP Protocol, and Local Time and Synchronizing
Source settings to Real Time Clock menu
Added new Precision Time Protocol (1588) menu and setting descriptions
Changed Communication to Real Time Clock in SNTP protocol settings path. Moved SNTP
Protocol menu and settings descriptions to Real Time Clock subsection
Deleted section k) SNTP Protocol and the settings descriptions
Added new section for Local Time menu settings and settings description
Added new PTP Fail menu item to the User-Programmable Self Tests menu
Added PTP Failure and CLOCK UNSYNCHRONIZED to Flexlogic Operands table
Updated PMU main menu to add aggregator and control block menu items
Added UR Synchrophasor Implementation of IEC61850-90-5 to the PMU software option
description
Updated Figure: Complete Synchrophasor Implementation
Added Figure: N60 Support For Four Logical Device PMU
Updated Table: Implementation By Model Number
Added Figure: Logical Nodes Supported In Each Logical Device
Added Figure: Data Set Created From User Selected Internal Items
Added Figure: Example Of Aggregator Data Sets
Added Figure: CFG-2 Based Configuration Solution
Added examples for a syncrophasor dataset and the creation of different datasets
Added example for a CFG-2 based configuration
Updated PMU 1 basic configuration menu to add 37.118 and 90-5 configuration settings
submenus
Added PMU 1 configuration menus for 37.118 and 90-5 with settings descriptions
Changed PMU 1 Function setting description
Added PMU AGGR 1 configuration menu and setting descriptions
Added new aggregators section with PMU 1 aggregators menu and setting descriptions
Updated PMU 1 aggregators menu to include 37.118 and 90-5 aggregator configuration
submenus
Added 90-5 AGGR 1 configuration menu and setting descriptions
Added Table 5-11 # Of ASDUs
Added new control block section with IEC 90-5 MSVCB configuration menu and setting
descriptions
Added row for DeltaTime to Table 5-: FlexElement Base Units
Updated Settings Group menu in section 5.6.2 to include Breaker Failure menu item
Added Breaker Failure menu and settings descriptions as section 5.6.12
Deleted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,
meaning the Settings > Input/Outputs > Remote Devices settings
Added new CyberSentry security section and main menu, local passwords, session settings,
restore defaults, and supervisory subsections to Chapter 5
G60 Generator Protection System
APPENDIX G
GE Multilin